weberfloor primerProduct formerly named: EMIX Primer
20L / drum
weberfloor primer is a dispersion of polymer in water with selective active agents to maximize penetration into substrate, and promotes good bond strength. The primer layer can effectively prevent air bubbles trapped in the substrate from diffusing into the self-levelling screed, which could otherwise cause pinholes on the surface of self-levelling screed. It is water-based, non-toxic, and has excellent adhesion to a wide range of substrates such as concrete and cement sand screed.
- Primer for self-levelling screed
- Sealing porous substrates
- Seal the substrate to prevent air bubbles coming up from the substrate into the self-levelling screed
- Increase adhesion strength of self-levelling screed to the substrate
- Water resistance
- Excellent wet and dry adhesion to the substrate
- Good wetting properties
The information and physical data on this website is given to the best of our knowledge under standard testing method and controlled environment. The results may vary with different weather / site conditions, workmanship or substrates. This is beyond our control that we shall not be liable for any faults or consequences arising or associated with this. We suggest comprehensive tests to be conducted before final application. Unless specified, all technical data are average values with curing time of 28 days. We reserve the right to update or amend the contents in the light of new findings during the course of research and development.